Brother HL-B2000D Online User'S Manual Download

Page: 116 / 207

> Print from iPad, iPhone, or iPod Touch

Print from iPad, iPhone, or iPod Touch

Related Models

: HL-B2050DN

The procedure used to print may vary by application. Safari is used in the example below.

1. Make sure your Brother machine is turned on.
2. Use Safari to open the page that you want to print.

3. Tap

4. Tap

Print

5. Make sure your Brother machine is selected.
6. If a different machine (or no printer) is selected, tap

Printer

A list of available machines appears.

7. Tap your machine's name in the list.
8. Select the desired options, such as the number of pages to print and 2-sided printing (if supported by your

machine).

9. Tap

Print

Related Information

•

Print Using AirPrint

112

Summary of Contents for HL-B2000D
















































































































































































































Search results

Summary of Contents for HL-B2000D

Reviews:

Related manuals for HL-B2000D

Brands by name

Popular brands

Brother HL-B2000D, Online User'S Manual

Search results

Summary of Contents for HL-B2000D

Reviews:

Related manuals for HL-B2000D

Brands by name

Popular brands