manualshive.com logo in svg

Brother HL-720, Service Manual

Share
Download
Brother HL-720 Service Manual Download Page 160

USER’S GUIDE

CHAPTER 2 –4

MULTI-PURPOSE SHEET FEEDER

The printer has a multi-purpose sheet feeder that can feed plain paper,
envelopes, transparencies and organizer paper.

To use the multi-purpose sheet feeder, follow these steps:

1. Make sure that you have selected the proper paper source, paper size

and orientation.

✒

Note

• 

You may select the proper paper source, paper size, and orientation in
your application software.

• 

If your application software does not support your custom paper size,
select the next paper size up that is closest but larger than the custom
size. Then adjust the print area by changing the right and left margins in
your application software.

2. Make sure that the multi-purpose sheet feeder contains the selected size

of paper in the selected orientation. If necessary, change the paper in the
feeder.

3. Send your file or document to the printer.

When the printer receives data, it begins the print process by loading
paper from the multi-purpose sheet feeder. If the printer is in sleep
mode when it receives data, it will wake up and start the printing
process automatically.

Summary of Contents for HL-720
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands