5.
SERVER
After you register a user name and password, you have to set the POP3 server or IP address, POP3 port,
POP3 account and password.
NOTE:
If you have already used the e-mail software, enter the same POP3 server, POP3 port, POP3 account and
password. If there is not a POP3 port setting in the e-mail software you are using, enter the default value,
110.
POP3 Server
Enter the host name of the POP3 server. If you do not know the name of your POP server, ask your Internet
service provider or network administrator.
POP3 Port
The default value is 110. You do not have to change it normally, but ask the network administrator if your
system uses a different port number.
POP3 Account
Enter the POP3 account. If you do not know the account, ask your Internet service provider or network
administrator.
Password
Enter the password for the POP3 account. Please note that the password is case sensitive.
