manualshive.com logo in svg

Brother HL-720, Service Manual

The Brother HL-720 is a reliable and high-performance printer designed to meet your everyday printing needs. Unlock the full potential of your device by accessing the comprehensive Service Manual, available for free download at manualshive.com. Get instant access to this valuable resource and ensure smooth operation of your printer.

Share
Download
background image

REGULATIONS

vii

Radio Interference (220-240 V Model Only)

This printer complies with EN55022(CISPR Publication 22)/Class B.
  
Before this product is used, ensure that you use a double-shielded interface cable with
twisted-pair conductors and that it is marked “IEEE 1284 compliant”. The cable must
not exceed 1.8 metres in length.

Laser Safety (For 110–120 V Model Only)

This printer is certified as a Class I laser product under the U.S. Department of Health and
Human Services (DHHS) Radiation Performance Standard according to the Radiation Control
for Health and Safety Act of 1968. This means that the printer does not produce hazardous
laser radiation.

Since radiation emitted inside the printer is completely confined within protective housings
and external covers, the laser beam cannot escape from the machine during any phase of user
operation.

FDA Regulations (For 110-120 V Model Only)

U.S. Food and Drug Administration (FDA) has implemented regulations for laser products
manufactured on and after August 2, 1976. Compliance is mandatory for products marketed
in the United States. One of the following labels on the back of the printer indicates
compliance with the FDA regulations and must be attached to laser products marketed in the
United States.

MANUFACTURED:
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA
This product complies with FDA radiation performance standards, 21 CFR Subchapter J

MANUFACTURED:
BROTHER INDUSTRIES (USA) INC.
2950 Brother Blvd., Bartlett, TN 38133, U.S.A.
This product complies with FDA radiation performance standards, 21 CFR Subchapter J

MANUFACTURED:
BROTHER INDUSTRIES LTD.
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467 Japan
This product complies with FDA radiation performance standards, 21 CFR Subchapter J

Caution

Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.

Summary of Contents for HL-720
























































































































































































































Reviews:

No comments

Related manuals for HL-720

Samsung MFP SCX-6345N Manual Del Usuario preview
MFP SCX-6345N
Brand: Samsung Pages: 165
Samsung Inkjet SF-430 Quick Install Manual preview
Inkjet SF-430
Brand: Samsung Pages: 2
Samsung Inkjet SCX-1150F Repair Manual preview
Inkjet SCX-1150F
Brand: Samsung Pages: 66
Samsung CLX-6220FX User Manual preview
CLX-6220FX
Brand: Samsung Pages: 155
Samsung CLX-3170FN series User Manual preview
CLX-3170FN series
Brand: Samsung Pages: 220
Samsung CLX 6210FX - Color Laser - All-in-One License Agreement preview
CLX 6210FX - Color Laser - All-in-One
Brand: Samsung Pages: 36
Samsung CLX-3160 Series User Manual preview
CLX-3160 Series
Brand: Samsung Pages: 139
Samsung MFP SCX-6345N Service Manual preview
MFP SCX-6345N
Brand: Samsung Pages: 8
Samsung Lazett Combo SCX-4016 Quick Install Manual preview
Lazett Combo SCX-4016
Brand: Samsung Pages: 2
Samsung CLX-3305FW User Manual preview
CLX-3305FW
Brand: Samsung Pages: 319
JCM GEN5 Series Operation And Maintenance Manual preview
GEN5 Series
Brand: JCM Pages: 70
Magtek ExpressCard 2000 Preventive Maintenance Procedure preview
ExpressCard 2000
Brand: Magtek Pages: 25
Unimark Sprite Installation And Operator'S Manual preview
Sprite
Brand: Unimark Pages: 36
Canon imageRUNNER ADVANCE C350iF Service Manual preview
imageRUNNER ADVANCE C350iF
Brand: Canon Pages: 102
Canon imageRUNNER ADVANCE C2230 Manual preview
imageRUNNER ADVANCE C2230
Brand: Canon Pages: 12
Canon IR 2420 User Manual preview
IR 2420
Brand: Canon Pages: 598
Canon ColorWave 3800 Operation Manual preview
ColorWave 3800
Brand: Canon Pages: 358
CraftBot FLOW IDEX DOME Installation Manual preview
FLOW IDEX DOME
Brand: CraftBot Pages: 9

Brands by name

Popular brands

Load more brands