manualshive.com logo in svg

Brother HL-7050 Series, User Manual

Share
Download
Brother HL-7050 Series User Manual Download Page 130

OPTIONS 4 - 3

HL7050_US_UG_FM5.5

Lower-tray unit (LT-7000)

The lower-tray unit (Trays 2/3/4) is an optional device that can hold 
extra paper. It can hold up to 500 sheets of paper (80 g/m

2

 or 20 lb) 

in each tray. When all three trays are installed, the printer can hold 
up to 2100 sheets of plain paper. If you want to buy an optional 
lower-tray unit, call the dealer you bought the printer from.  

Expands up to a total of 2100 sheets

Figure 4-1

To install the lower-tray unit, please see the User's Guide that we 
have supplied with the lower tray.  

■

If you put the lower-tray unit on the floor,  we strongly 
recommend that you put the small pads that we have 
supplied on the underside of the lower-tray unit as shown 
above. 

■

Even if a tray has been moved to another tray position, the 
driver will find the correct tray and print according to the 
setting.  

MP tray
(100 sheets)

Paper tray
(500 sheets)

Lower-tray unit
(500 sheets x 3 trays)

Summary of Contents for HL-7050 Series






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands