CONTROL PANEL 3 - 17
PRINT MENU
Display Shows
Description
MEDIA TYPE
=PLAIN PAPER, TRANSPARENCIES, THICK PAPER, THICKER PAPER, THIN
PAPER, BOND PAPER, ENVELOPES, ENV.THIN, RECYCLED PAPER
PAPER
Sets the paper size to LETTER, A4, LEGAL, FOLIO, EXECUTIVE, COM-10,
MONARCH, C5, DL, DLL, B5, A5, A6, B6, JIS B5, A4 LONG, POST CARD,
ORGANIZER J, ORGANIZER K, ORGANIZER L, ORGANIZER M
COPIES
You can check the total number of printed pages.
Shows the number of printed pages (1 to 999).
ORIENTATION
This printer can print pages in portrait or landscape orientation.
PORTRAIT or LANDSCAPE
PRINT POSITION
This printer can be adjusted to align the page format.
Subsetting
Description
X OFFSET=0
=-500, -499 ... + 499, +500
Moves the print start position (at the top-left corner of
pages) horizontally up to -500 (left) to +500 (right) dots in
300 dpi.
Y OFFSET=0
=-500, -499 ... + 499, +500
Moves the print start position (at the top-left corner of
pages) vertically up to -500 (up) to +500 (down) dots in
300 dpi.
AUTO FF TIME
=OFF/1, 2, 3 ... 99 (sec)
Allows you to print the remaining data without pressing the Go button.
FF SUPPRESS
=OFF/ON
Turns the feed suppress (PAUSE) setting ON or OFF.
HP LASERJET
Subsetting
Description
FONT NO.
=I000 ... ####
FONT PITCH/POINT
=##.##
SYMBOL SET
PC-8/...
Sets the symbol set or the character set.
TABLE PRINT
Prints code table.
AUTO LF
=OFF/ON
ON: CR
→
CR+LF,
OFF: CR
→
CR
AUTO CR
=OFF/ON
ON: LF LF+CR, FF+CR, or VT
→
VT+CR
OFF: LF
→
LF, FF
→
FF, or VT
→
VT
AUTO WRAP
=OFF/ON
Selects whether a line feed and carriage return will
happen when the printer reaches the right margin.
AUTO SKIP
=ON/OFF
Selects whether a line feed and carriage return will
happen when the printer position reaches the bottom
margin.
LEFT MARGIN
=##
Sets the left margin at column 0 to 70 columns at 10 cpi.
