Brother HL-6050DN User Manual Download

Page: 43 / 181

1 - 35 ABOUT THIS PRINTER

Printing on both sides of the paper

The supplied printer drivers for Windows

95/98/Me, Windows NT

4.0, Windows

2000/XP, Mac OS

8.6 to 9.2 and Mac OS

X 10.1/10.2 all enable duplex printing. For more information about how to choose

the settings, see the Help text in the printer driver.

Manual duplex printing from the paper tray (For PCL printer driver)

Choose the Manual Duplex printing mode from the Advanced tab, and from the Basic tab select
the Paper Source to be Tray 1.

The printer will automatically print all the even-numbered pages on one side of the paper first.

Remove the printed even numbered pages from the output tray and put them back in the paper tray,
placing the paper with the side to be printed on (blank side) face down. Follow the instructions on
the computer screen.

Figure 1-45

The printer will now automatically print all the odd numbered pages on the other side of the paper.

The BR-Script 3 printer driver (PostScript

3™ Emulation) does not support manual duplex printing.

If you select the Paper Source to be Auto Select in Step 1, please put the printed even-numbered
pages in the MP tray.

Summary of Contents for HL-6050DN






















































































































































































Search results

Summary of Contents for HL-6050DN

Reviews:

Related manuals for HL-6050DN

Brands by name

Popular brands

Brother HL-6050DN, User Manual

Search results

Summary of Contents for HL-6050DN

Reviews:

Related manuals for HL-6050DN

Brands by name

Popular brands