Control Panel
87
4
Using the control panel LCD menu
4
When you use the Menu buttons (
+
,
-
,
Set
or
Back
), remember the following basic steps:
When you press
Set
to choose a setting, an asterisk appears at the end of the LCD for a short time. After
that, the LCD returns to the previous menu level.
If no control panel operations are performed for 30 seconds, the LCD automatically returns to
READY
.
After changing the status or a setting, pressing
Back
before you press
Set
will cause the LCD to return to
the previous menu level with the original settings unchanged.
There are two ways to input numbers. You can press
+
or
-
to scroll up or down one number at a time, or
you can hold down
+
or
-
to scroll faster. The blinking number is the one that you can change.
For example: If you feed paper from the MP tray as a priority, change the MP FIRST setting to ON as
follows.
4
The default setting is
OFF
. Turn this setting
ON
if you want to.
a
Press any of the menu buttons (
+
,
-
,
Set
or
Back
) to take the printer offline.
READY
h
INFORMATION
b
Press
+
or
-
to choose
PAPER
.
PAPER
c
Press
Set
to move to the next menu level.
SOURCE
d
Press
+
or
-
to choose
MP FIRST
.
MP FIRST
e
Press
Set
.
=OFF *
f
Press
+
to choose
ON
.
=ON
g
Press
Set
.
An asterisk * briefly appears at the end of the LCD.
The current setting is shown by an *.
=ON *
