manualshive.com logo in svg

Brother HL 5370DW, Network User'S Manual

The Brother HL 5370DW is a high-performance network-ready printer. Enhance your printing experience with the comprehensive Network User's Manual, available for free download at manualshive.com. This manual offers detailed instructions and troubleshooting tips to ensure seamless connectivity and optimal performance. Get your manual now and unleash the printer's full potential.

Share
Download
background image

Configuring your machine for a wireless network (For HL-5370DW)

25

3

Confirm your wireless network setup method

3

There are three methods to configure your wireless network machine. Use the Brother installer application 
on the CD-ROM (recommended). Use the one-push wireless setting mode or use the PIN Method of Wi-Fi 
Protected Setup. The setup process will be different depending on your network environment.

Note

 

If you configure the wireless network settings in Ad-hoc mode, use the Brother installer application on the 
CD-ROM we have provided with the machine.

 

Configuration using the Brother installer application on the CD-ROM to 
configure your machine for a wireless network (Recommended)

3

We recommend that you use the Brother installer application on the CD-ROM we have provided with the 
machine. By using this application, you can easily connect your machine to your wireless network and install 
the network software and printer driver which you need to complete the configuration of your machine for a 
wireless network. You will be guided by the on-screen instructions until you are able to use your Brother 
wireless network machine. You must know your wireless network settings before you proceed with this 
installation.

Configuration temporarily using a network cable

3

You need to temporarily use an Ethernet cable when you configure your Brother printer in this method. The 
Ethernet cable is not a standard accessory.
If there is an Ethernet Hub or Router in the same network as the wireless access point (A) of your machine, 
you can temporarily connect the Hub or Router to the machine using an Ethernet cable (B), this is an easy 
way to configure the machine. You can then remotely configure the machine from a computer on the network.

B

A

Summary of Contents for HL 5370DW












































































































































































































Reviews:

No comments

Related manuals for HL 5370DW

Canon iPF650 - imagePROGRAF Color Inkjet Printer Basic Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 40
Canon iP90 - PIXMA Color Inkjet Printer Easy Setup Instructions preview
iP90 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon iPF650 - imagePROGRAF Color Inkjet Printer Install Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 16
Canon iP100 - PIXMA Color Inkjet Printer Setup Instructions preview
iP100 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual preview
imageRUNNER ADVANCE C5560
Brand: Canon Pages: 67
Canon iPF710 - imagePROGRAF Color Inkjet Printer Operations preview
iPF710 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 2
DataCard SD460 Quick Start Manual preview
SD460
Brand: DataCard Pages: 7
Xerox DocuPrint N24 Supplies Manual preview
DocuPrint N24
Brand: Xerox Pages: 2
Xerox Phaser 4510 Advanced Features Manual preview
Phaser 4510
Brand: Xerox Pages: 80
Xerox Docutech 128 Planning Manual preview
Docutech 128
Brand: Xerox Pages: 38
Canon imageCLASS MF269dw Setup Manual preview
imageCLASS MF269dw
Brand: Canon Pages: 32
Samsung ML-7300N User Manual preview
ML-7300N
Brand: Samsung Pages: 158
Xante FilmMaker 4 Quick Reference Manual preview
FilmMaker 4
Brand: Xante Pages: 31
IBM Power 570 Technical Overview And Introduction preview
Power 570
Brand: IBM Pages: 142
Lexmark C910 Finisher Manual preview
C910 Finisher
Brand: Lexmark Pages: 11
Radio Shack Daisy Wheel 410 Service Manual preview
Daisy Wheel 410
Brand: Radio Shack Pages: 140
UEi KMIRP2 Instruction Manual preview
KMIRP2
Brand: UEi Pages: 4
Xblue Networks X-50 Quick Installation Manual preview
X-50
Brand: Xblue Networks Pages: 42

Brands by name

Popular brands

Load more brands