2-64
Confidential
■
Error code 94
No paper is loaded in the paper tray 1. (Registration front sensor fails to be turned ON.)
<User Check>
- Load paper in the paper tray 1.
■
Error code 95
No paper in paper tray 2.
<User Check>
- Load paper in the paper tray 2.
- Check if paper is properly loaded in the paper tray 2. (Check of connector connection)
No Paper
Load <size> paper in Tray 1.
Step
Cause
Remedy
1
Coming off of registration front
actuator
Re-assemble the registration front
actuator.
2
Harness connection failure of T1
registration front/rear sensor
PCB ASSY
Check the harness connection of the
T1 registration front/rear sensor PCB
ASSY and reconnect it.
3
Registration front sensor failure
Check the sensor performance following
the procedure described in
. If any problem occurs, replace the T1
registration front/rear sensor PCB ASSY.
4
Engine PCB failure
Replace the engine PCB ASSY.
5
Main PCB failure
Replace the main PCB ASSY.
No Paper
Load <size> paper in Tray 2.
Step
Cause
Remedy
1
T2 paper edge actuator
malfunction
Re-assemble the T2 paper edge actuator.
2
Harness connection failure of
T2 sensor PCB ASSY
Check the harness connection of the
T2 sensor PCB ASSY and reconnect it.
3
Harness connection failure of
T2 Relay PCB ASSY
Check the harness connection of the
T2 Relay PCB ASSY and reconnect it.
4
Harness connection failure of
plate drive motor
Check the harness connection of the
plate drive motor and reconnect it.
5
T2 paper edge sensor failure
Check the sensor performance following
the procedure described in
. If any problem occurs, replace the T2
paper feed frame unit.
6
T2 Relay PCB failure
Replace the T2 Relay PCB ASSY.
7
Engine PCB failure
Replace the engine PCB ASSY.
8
Main PCB failure
Replace the main PCB ASSY.
Summary of Contents for HL-4140CN
