Brother HL-3400CN Series, User Manual

Page: 75 / 280

USER’S GUIDE
4–4
Status
Emulation Mode
AUTO: Auto emulation selection
PCL5C: HP PCL5C fixed
BRScript: BR-Script fixed
HP-GL: HP HP-GL fixed
FX-850: Epson FX-850 fixed
Pro.XL: IBM Proprinter XL
LJ PRINT 002 L ■ T1
AUTO ■ ■ ■ ■
K C M Y
Copy Pages Orientation
“P”
... Portrait
“L”
... Landscape
“p”
... Reverse portrait
“l”
... Reverse landscape
Current Emulation
“##” ... Fixed emulation expressed with double figures
“LJ”
... AUTO HP PCL5C emulation
“BS” ... AUTO BR-Script 2
“GL”
... AUTO HP-GL emulation
“FX”
... AUTO EPSON FX-850 emulation
“PR”
... AUTO IBM Proprinter XL emulation
Fig. 4-2 Display
About Routine Maintenance Messages
This printer has some user serviceable parts that require periodic
replacement. The printer counts the number of printed pages and detects
the life of each of these parts. When the part nears the end of its useful
life, the following messages appear on the LCD display. These messages
will over-write the Emulation Mode status information.
Refer to
Chapter 5 for detailed information on consumables life.
Maintenance Message Meaning
K C M Y
When the mark blinks ( ), the
indicated color toner is nearly empty. K:
Black, C: Cyan, M: Magenta, Y: Yellow.
When the toner becomes empty the
indicator disappears completely.
FUSER OIL LOW
Oil in the Oil Bottle is nearly empty.
REPLACE FCR
*1 Time to replace the Fuser Cleaner.
REPLACE OPC BELT
*1 Time to replace the (OPC) Belt Cartridge.
REPLACE FUSER
*1 Time to replace the Fixing Unit.
REPLACE 240K KIT
*1 Time to replace the Drum Cleaner, the
Paper discharger and the Transfer Drum.
*1 - After replacing these parts, you must reset the part life counter. This
enables the printer to begin tracking the part life correctly. See
“Maintenance” in Chapter 5 .
Paper Source
“T1” ... Tray 1
“T2”
... Tray 2
“MN”
... Manual Feed
Toner Level
I
: sufficient toner
(blinking I): toner nearly empty
disappear: toner empty
Duplex
I
: duplex
: simplex