Brother HL-3160CDW Online User'S Manual Download Page 35

Page: 35 / 319

Home >

Paper Handling

Load Paper

Load and Print Paper in the Manual Feed Slot

> Load and Print on

Envelopes in the Manual Feed Slot

Load and Print on Envelopes in the Manual Feed Slot

When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on
your computer at the same time.

1. Open the machine's back cover (the face up output tray).

The machine automatically turns on Manual Feed mode when you load paper in the manual feed slot.

2. Pull down the two grey levers, one on the left side and one on the right side, as shown in the illustration.

3. On the front of the machine, open the manual feed slot cover.

4. Use both hands to slide the manual feed slot paper guides to fit the width of the paper that you are using.

Summary of Contents for HL-3160CDW
































































































































































































































































































































Search results

Summary of Contents for HL-3160CDW

Reviews:

Brands by name

Popular brands

Brother HL-3160CDW, Online User'S Manual

Search results

Summary of Contents for HL-3160CDW

Reviews:

Brands by name

Popular brands