Brother HL-3160CDW, Online User'S Manual

Page: 296 / 319

Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables (HL-3190CDW)
Settings Tables (HL-3190CDW)
Related Models : HL-3190CDW
[Settings]
Level 2 Level 3 Level 4 Descriptions
Toner Toner Life - View the approximate remaining toner life.
Test Print
- Print a test page.
Calibration Calibrate Initiate colour calibration to check and correct colours.
Reset Reset the calibration parameters to the default settings.
Registration - Align the print position of each colour.
Network - - Access the Network setting menus.
Tray Setting - - Access the tray setting menus.
Wi-Fi Direct - - Access the Wi-Fi Direct setting menus.
Eco Mode - - Turn the following machine settings on at the same time.
•
2-sided Print
:
Long Edge
(Available only for certain
models)
•
Sleep Time
:
0 Min
•
Dim Timer
:
10 Secs
All Settings - - Configure the detailed settings.
[All Settings]
>
[General Setup]
Level 3 Level 4 Descriptions
Tray Setting Paper Type Select the paper type that matches the paper in the tray.
Paper Size Select the size of paper you loaded in the tray.
Check Size Select whether to display a message telling you to check that the size of the
paper in the machine and the machine's Paper Size setting match.
Manual Feed Select whether to print from the Manual Feed Slot.
LCD Settings Backlight Adjust the brightness of the LCD backlight.
Dim Timer Set how long the LCD backlight stays on after the last finger press.
Ecology Eco Mode Turn the following machine settings on at the same time.
•
2-sided Print
:
Long Edge
(Available only for certain models)
•
Sleep Time
:
0 Min
•
Dim Timer
:
10 Secs
Toner Save Increase the page yield of the toner cartridge.
Sleep Time
Set how much time will pass before the machine enters Power Saving
mode.
Quiet Mode Decrease printing noise.
Auto Power Off Set the number of hours that the machine will remain in Deep Sleep mode
before going into Power Off mode.
Setting Lock Set Password Restrict unauthorised users from changing the machine’s settings.
Lock Off
⇒
On
292