Brother HL-2600CN Series, Technical Reference Manual, Page: 302 / 491

2009/06/29
CHAPTER 6 EPSON - 27
Print double-speed double-density image
EscYn
1
n
2
<image data> (27)(89)n1n2.... <1Bh><59h>n1n2....
•
This command enables you to define and print a single line raster bit image on a single text line.
•
n
1
and n
2
define the number of bytes that comprise the image.
•
The image consists of 256* n
2
+ n
1
bytes of data, each byte representing a single vertical column of
4/30".
•
Each byte represents a vertical column of eight dots, the most significant bit representing the dot at
the top. Simply set a bit to 1 if you want a dot to appear in that position, and to 0 if you want white
space to appear.
•
Images are printed from left to right.
•
Images are printed at an approximate horizontal resolution of 120 dots per inch and at an approximate
vertical resolution of 72 dots per inch.
•
You can only use this command in portrait orientation.
•
The printer always prints as fast as possible, hence this command is the exact equivalent of the Esc L
command.
10 WIDTH “LPT1:”,255
20 LPRINT “*** ESC Y n1 n2 ***”
30 FOR I=1 TO 5
40 ‘* DOUBLE-SPEED & DOUBLE-DENSITY BIT IMAGE MODE *
50 LPRINT CHR$(27);”Y”;CHR$(160);CHR$(0);
60 FOR J=1 TO 8
70 FOR K=1 TO 20
80 N=2^J-1
90 LPRINT CHR$(N);
100 NEXT K
110 NEXT J
120 LPRINT
130 NEXT I:END
** ESC Y n1 n2 ***
Sample 13
Print quadruple-density image
EscZn
1
n
2
<image data> (27)(90)n1n2.... <1Bh><5Ah>n1n2....
• This command enables you to define and print a single line raster bit image on a single text line.
•
n
1
and n
2
define the number of bytes that comprise the image.
•
The image consists of 256* n
2
+ n
1
bytes of data, each byte representing a single vertical column of
4/30".
•
Each byte represents a vertical column of eight dots, the most significant bit representing the dot at
the top. Simply set a bit to 1 if you want a dot to appear in that position, and to 0 if you want white
space to appear.
•
Images are printed from left to right.
•
Images are printed at an approximate horizontal resolution of 240 dots per inch and at an approximate
vertical resolution of 72 dots per inch.
•
You can only use this command in portrait orientation.
10 WIDTH “LPT1;”,255
20 LPRINT “*** ESC Z n1 n2 ***”
30 FOR I=1 TO 5
40 ‘* QUADRUPLE-DENSITY BIT IMAGE MODE *
50 LPRINT CHR$(27);”Z”,CHR$(160);CHR$(0);
60 FOR J=1 TO 8
70 FOR K=1 TO 20
80 N=2^J-1
90 LPRINT CHR$(N);
100 NEXT K
110 NEXT J
120 LPRINT
130 NEXT I:END
*** ESC Z n1 n2 ***
Sample 14