Brother HL-2600CN Series Technical Reference Manual Download Page 285

Page: 285 / 491

2009/06/29

CHAPTER 6 EPSON - 10

Set inter-character space

EscSPn (27)(32)n

<1Bh><20h>n

•

This command allows you to set the space between successive characters.

•

is the space between characters in multiples of 1/120".

•

must be in the range 0 to 127.

LPRINT CHR$(27); CHR$(32); CHR$(5); 'Set 1/24" char space

Select justification mode

Escan (27)(97)n

<1Bh><61h>n

•

This command allows you to select the justification mode for subsequent text.

•

Set

to 0 to select left justification.

•

Set

to 1 to centre subsequent text.

•

Set

to 2 to select right justification.

•

Set

to 3 to select full justification (text will be both left and right justified).

•

The default justification mode is left justification.

•

The horizontal tab,

, and backspace,

, control codes can only be used in left justification mode.

LPRINT CHR$(27); CHR$(97); CHR$(2); 'Right justify text

Set absolute print position

Esc$n1n2 (27)(36)n1n2 <1Bh><24h>n1n2

•

This command allows you to print characters a specified distance in from the left margin.

•

The unit of movement is 1/60".

•

The specified distance to be moved is

*256)/120".

•

If the specified position is to the right of the right margin the command is ignored.

LPRINT CHR$(27); CHR$(36); CHR$(120); CHR$(0); 'Print a line 2" in

Set relative print position

Esc\n1n2 (27)(92)n1n2

<1Bh><5Ch>n1n2

•

This command allows you to print characters a specified distance to the left or right of the current
print position.

•

The unit of movement is 1/120".

•

If you wish to move the print position to the right, the distance the print position is to be moved is
calculated as

*256))/120".

•

If you wish to move the print position to the left, the distance the print position is to be moved is
calculated as (65536 – (

*256)))/120".

•

If the specified position is beyond the left or right margin the command is ignored.

LPRINT CHR$(27); CHR$(36); CHR$(180); CHR$(0); 'Print a line 1.5" to
the right

Select unidirectional printing

Esc< (27)(60)

<1Bh><3Ch>

This command has no effect.

Select / cancel unidirectional printing

EscU (27)(85)

<1Bh><55h>

This command has no effect.

Summary of Contents for HL-2600CN Series












































































































































































































































































































































































































































































































Search results

Summary of Contents for HL-2600CN Series

Reviews:

Brother HL-2600CN Series, Technical Reference Manual, Page: 285 / 491

Search results

Summary of Contents for HL-2600CN Series

Reviews: