manualshive.com logo in svg

Brother HL-2600CN Series, Technical Reference Manual, Page: 113 / 491

Share
Download
Brother HL-2600CN Series Technical Reference Manual Download Page 113

7/17/2009 

CHAPTER 2 "PCL" - 93 

7.2. 

Defining a Macro 

To define a macro you must first assign an ID number to it, then send to the printer a Start Macro Definition 
command, the macro definition itself (consisting of a sequence of PCL commands) and finally an End Macro 
Definition command. 

7.2.1. Macro 

ID 

Esc&f#Y (27)(38)(102)#(89) 

<1Bh><26h><66h>#<59h> 

•

 

This command assigns an identity number to a macro that is to be downloaded, or references an existing 
macro in the printer’s memory. 

•

 

# is  the ID number of a macro. The ID number must be in the range 0-32767. 

•

 

If you specify the ID number of an existing macro and then download a new macro definition to the printer, 
the new macro will overwrite the existing macro. 

 

7.2.2.  Start macro definition 

Esc&f0X (27)(38)(102)(48)(88) <1Bh><26h><66h><30h><58h> 

•

 

This command signifies that the following commands constitute a macro definition. 

 

7.2.3.  End macro definition 

Esc&f1X (27)(38)(102)(49)(88) <1Bh><26h><66h><31h><58h> 

•

 

This command terminates the macro definition. 

 

Summary of Contents for HL-2600CN Series












































































































































































































































































































































































































































































































Reviews:

No comments