manualshive.com logo in svg

Brother HL-2600CN Series, Technical Reference Manual, Page: 110 / 491

Share
Download
Brother HL-2600CN Series Technical Reference Manual Download Page 110

7/17/2009

 

CHAPTER 2 "PCL" - 90 

6.4. Vector 

Graphics 

For large-scale graphic images it is more efficient to use vector graphics. In LaserJet emulation mode you can 
set up the page area on which to print vector graphics images. The vector graphics capabilities of these HL 
Series printers working in HP-GL/2 mode are described in the HP-GL/2 section of this manual.  

6.4.1.  Enter HP-GL/2 mode 

Esc%#B (27)(37)#(66)  <1Bh><25h>#<42h> 

•

 

This command enters HP-GL/2 graphics mode. 

•

 

# = 0 the cursor is positioned at the previous HP-GL/2 cursor position. If this is the first time you have 
switched to HP-GL/2 mode since switching the printer on, the cursor is placed at the origin of the HP-GL/2 
graphics window. 

•

 

# = 1 the cursor remains at its current position. 

 

Summary of Contents for HL-2600CN Series












































































































































































































































































































































































































































































































Reviews:

No comments