Brother HL-2600CN Series, Service Manual

Page: 254 / 385

VII-42
4.3.8 Paper Sensor (D. EN)
1) Disconnect the connector (1 pc.) connected to the paper sensor (D. EN).
2) Release the three hooks inside the frame to remove the paper sensor (D. EN) from
the frame.
Fig.7-58
4.3.9 Rear Cover 2 / Rear Cover (U) 2
1) Remove the set screw BT4X8 (1 pc.) of rear cover 2.
2) Remove the rear cover 2 from the frame.
3) Push the two hooks downwards to release them and remove the rear cover (U) 2
from the frame.
Fig.7-59
Hook
Hook
Rear cover (U) 2
Rear cover 2
Hook
Paper sensor (D. EN)