Security features
33
7
Sending an E-mail securely
7
Configuration using Web Based Management (web browser)
7
You can configure secured E-mail (for Notification and reports) sending with user authentication on the Web
Based Management screen.
a
Start your web browser.
b
Type “
http://printer’s IP address/
” into your browser (where “
printer’s IP address
” is
the printer’s IP address).
For example:
http://192.168.1.2/
c
Click
Network Configuration
.
d
Enter a user name and a password. The default User Name is “
admin
” and the default Password is
“
access
”.
e
Click
Configure Protocol
.
f
Click
Advanced Setting
of
POP3/SMTP
and make sure that the status of
POP3/SMTP
is
Enable
.
g
You can configure the
POP3/SMTP
settings on this page.
Note
• For more information, see the Help text in Web Based Management.
• You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail.
h
After configuring, click
Submit
. The Test E-mail Send Configuration dialog appears.
i
Follow the instructions on-screen if you want to test with the current settings.
Sending an E-mail with user authentication
7
This machine supports POP before SMTP and SMTP-AUTH methods to send an E-mail via an E-mail server
that requires a user authentication. These methods prevent an unauthorized user from accessing the E-mail
server. You can use Web Based Management, BRAdmin Professional 3 and Web BRAdmin to configure
these settings. You can use POP before SMTP and SMTP-AUTH methods for E-mail Notification and E-mail
reports.
E-mail server settings
You need to match the settings of SMTP authentication method with the method used by your E-mail server.
Contact your network administrator or your ISP (Internet Service Provider) about the E-mail server
configuration.
You will also need to check
SMTP-AUTH
of
SMTP Server Authentication Method
to enable the SMTP
server authentication.
