manualshive.com logo in svg

Brother HL-2035, User Manual

Share
Download
Brother HL-2035 User Manual Download Page 5

iv

Trademarks

The Brother logo is a registered trademark of Brother Industries, Ltd. 
Apple, the Apple Logo, Macintosh and TrueType are registered trademarks of Apple Inc. in the United States 
and other countries.
Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States 
and other countries.
Microsoft, MS-DOS, Windows and Windows Server are registered trademarks of Microsoft Corporation in the 
United States and/or other countries.
Citrix and MetaFrame are registered trademarks of Citrix Systems, Inc. in the United State.
All other terms and brand and product names mentioned in this User’s Guide are registered trademarks of 
their respective companies.

Compilation and Publication Notice

Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the 
latest product’s descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained 
herein and shall not be responsible for any damages (including consequential) caused by reliance on the 
materials presented, including but not limited to typographical and other errors relating to the publication.
© 2008 Brother Industries Ltd.

Shipment of the Printer

If for any reason you must ship your Printer, carefully package the Printer to avoid any damage during transit. 
We recommend that you save and use the original packaging. The Printer should also be adequately insured 
with the carrier.

Summary of Contents for HL-2035






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands