manualshive.com logo in svg

Brother HL-1430, User Manual

Share
Download
Brother HL-1430 User Manual Download Page 13

ABOUT THIS PRINTER   1 - 1

1

What is in the box?

When you unpack the printer, check to see that you have all of the following parts.

1

AC Power Cord

2

Drum Unit Assembly
(with Toner Cartridge included)

3

Printer

4

Quick Setup Guide

5

CD-ROM

Interface cable

■

An interface cable is not a standard accessory. Please purchase the appropriate cable for the 
interface you intend to use.

■

It is recommended to use a Parallel interface cable or USB interface cable that is no longer than 6 
feet (2 metres). 

■

For Parallel interface cable use a shielded interface cable that is IEEE 1284-compliant.

■

Do not connect the USB cable to the front of your PC or to the iMac’s keyboard.

About this printer

■

Components may differ from one country to another.

■

The power cord may be slightly different than the one in the figure above, depending on which 
country the printer was bought in.

1

2

3

4

5

Summary of Contents for HL-1430
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands