Brother HL-1240 User Manual Download Page 84

Page: 84 / 130

3-18

Caution

•

Do not touch the scanner window with your fingers.

•

Do not wipe the scanner window with cleaning alcohol (isophorol).

•

Handle the drum unit carefully because it contains toner. If toner scatters
and your hands or cloths get dirty, wipe or wash it off with cold water
immediately.

✒

Note

We recommend that you place the drum unit on a piece of cloth or disposable
paper in case you accidentally spill or scatter toner.

☛

Clean the primary corona wire inside the drum unit by gently sliding the tab
back and forth to the right and left ends several times.

Fig. 3-20 Cleaning the Primary Corona Wire

☛

Return the tab to the home position (

▲

mark position) before reinstalling the

drum unit assembly into the printer.

Caution

Be sure to position the tab at the Home position, otherwise, printed pages may
have vertical stripes.

Home Position (

▲

)

Summary of Contents for HL-1240



































































































































Search results

Summary of Contents for HL-1240

Reviews:

Related manuals for HL-1240

Brands by name

Popular brands

Brother HL-1240, User Manual

Search results

Summary of Contents for HL-1240

Reviews:

Related manuals for HL-1240

Brands by name

Popular brands