Brother FAX-8360P Owner'S Manual Download Page 28

Page: 28 / 126

Chapter 1

Changing One Touch and Speed Dial Numbers

If you try to store a One Touch or Speed Dial number in a location where a number is already stored,
the screen displays the current name stored there, then prompts you to either change it or exit.

Press

Menu

and press the One Touch Dial key where you want to change the number.

—

Press

Menu

and use the dial pad to enter a three-digit location (001-200), and press

Set

Press

to change the number stored, or press

to exit without making a change.

Enter a new number.

◆

If you want to erase the number, press

Clear

when the cursor is to the far left of the digits.

◆

If you want to change a digit, use

to position the cursor under the digit you want

to change, then enter the new digit—

—Press

Clear

to delete all characters above and to

the right of the cursor.

Follow the directions in Storing One Touch Dial or Speed Dial Numbers.

You can print a list of all stored numbers. (See

Using the Reports Key, page 32

Summary of Contents for FAX-8360P































































































































Search results

Summary of Contents for FAX-8360P

Reviews:

Related manuals for FAX-8360P

Brands by name

Popular brands

Brother FAX-8360P, Owner'S Manual

Search results

Summary of Contents for FAX-8360P

Reviews:

Related manuals for FAX-8360P

Brands by name

Popular brands