Brother FAX-8360P Owner'S Manual Download

Page: 27 / 126

Setup

ASIC F

AX USE

Storing Numbers for Easy Dialling

You can set up the machine to do three types of easy dialling: One Touch, Speed Dial and Groups
for Broadcasting of faxes. (See

Broadcasting

, page 36.)

Even if you lose electrical power, numbers stored in memory will not be lost.

Storing One Touch Dial Numbers

You can store 32 fax/phone numbers that you can dial by pressing one key. You can also store names
with these numbers. When you press a One Touch key, the screen displays the name or number as
the call is dialled. (See

One Touch Dialling

, page 20.)

Press

Menu

Press the One Touch Dial key where you want to store a number. The screen displays the
location you selected.

Enter a number (up to 20 digits), and press

Set

. The screen prompts you to enter a name for this

number.

Use the dial pad to enter the name (up to 15 characters). (See

Entering Text, page 106

.)—

—

Go to Step 5 to store the number without a name.

Press

Set

. Return to Step 2 to store another One Touch dial number—

—Press

Stop/Exit

When you dial a One Touch dial number, the screen displays the name you have stored or if you have
not stored a name, the number you have stored.

Storing Speed Dial Numbers

You can store Speed Dial numbers, which you dial by pressing only five keys. There are 200 Speed
Dial locations. (See

Speed Dialling

, page 29.)

Press

Menu

The screen prompts you to enter a location.

Use the dial pad to enter a three-digit location (001-200), and press

Set

. The screen displays

your entry, then prompts you to enter the number you’re storing.

Enter the number (up to 20 digits), and press

Set

The screen now prompts you to store a name with this number.

Use the dial pad to enter the name (up to 15 characters). (See

Entering Text, page 106

.)—

—

Go to Step 5 to store the number without a name.

Press

Set

. Return to Step 2 to store another Speed Dial number—

—Press

Stop/Exit

When you dial a Speed dial number, the screen displays the name you have stored or if you have not
stored a name, the number you have stored.

One Touch Dial keys are not the dial pad keys. They are the 16 keys (numbers
1-32). One Touch Dial Numbers 17-32 are accessed by holding down

Shift

while

you press the appropriate One Touch Dial key.

Summary of Contents for FAX-8360P































































































































Search results

Summary of Contents for FAX-8360P

Reviews:

Related manuals for FAX-8360P

Brands by name

Popular brands

Brother FAX-8360P, Owner'S Manual

Search results

Summary of Contents for FAX-8360P

Reviews:

Related manuals for FAX-8360P

Brands by name

Popular brands