Brother FAX-8360P Owner'S Manual Download Page 104 | Manualshive

Page: 104 / 126

background image

94

Chapter 13

Important Information for Some Countries

Important Safety Instructions

1

Read all of these instructions.

2

Save them for later reference.

3

Follow all warnings and instructions marked on the product.

4

Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.

5

Do not place this product near water.

6

Do not place this product on an unstable cart, stand, or table. The product may drop, causing
serious damage to the product.

7

Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure
reliable operation of the product and to protect it from overheating, these openings must not be
blocked or covered. The openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should never be placed near or on a radiator or heater.
This product should never be placed in a built-in installation unless proper ventilation is provided.

8

This product should be operated from the type of power source indicated on the label. If you are
not sure of the type of power available, consult with your dealer or local power company.

9

This product is equipped with a 2-wire grounding type plug and a 3-wire grounding type plug,
a plug having two or three pins. This plug will only fit into only a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.

10

Do not allow anything to rest on the power cord. Do not place this product where people can
walk on the cord.

11

If an extension cord is used with this product, make sure that the total ampere ratings on the
products plugged into the extension cord do not exceed the extension cord ampere rating.

12

Do not place anything in front of the machine that will block received faxes. Do not place
anything in the path of received faxes.

13

Do not touch a document during printing.

14

Never push objects of any kind into this product through cabinet slots, since they may touch
dangerous voltage points or short out parts resulting in the risk of fire or electric shock. Never
spill liquid of any kind on the product.

«
...
102
103
104
105
106
...
»

Summary of Contents for FAX-8360P































































































































Reviews:

No comments

Related manuals for FAX-8360P

Brand: Panasonic Pages: 2

Brand: Kärcher Pages: 237

Brand: Oki Pages: 32

Brand: Kärcher Pages: 26

Brand: Koblenz Pages: 12

Brand: Toshiba Pages: 33

Brand: Toshiba Pages: 33

Brand: Toshiba Pages: 42

Brand: Toshiba Pages: 41

Brand: Toshiba Pages: 42

Brand: Toshiba Pages: 48

Brand: Toshiba Pages: 55

Brand: Toshiba Pages: 67

Brand: Toshiba Pages: 77

Brand: Toshiba Pages: 79

Brand: Toshiba Pages: 113

Brand: Toshiba Pages: 120

Brand: Ibiza Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands