22
Chapter 2
Automatic and Manual Fax Redial
Automatic Fax Redial: If you are sending a fax automatically and the line is busy, the machine will
automatically redial up to 3 times at 5 minute intervals.
Manual Fax Redial: Place the document to be re-sent and press
Redial/Pause
and then
Fax Start
to make a second call to the last number dialled.
Broadcasting
Using the numbers you have stored in Groups, One Touch and Speed Dial memory, you can
“Broadcast” faxes automatically to a maximum of 104 (FAX-727/737MC) or 64 (FAX-717)
different locations in a few simple steps.
To Broadcast, you must set Memory TX to either
ON
or
NEXT FAX ONLY
.
After the Broadcast is completed, a Broadcast Report will be printed automatically to let you know
the results.
1
Insert the document face down in the Automatic Document Feeder.
2
Press
Menu/Set
,
3
,
9
to select
ON
or
NEXT FAX ONLY
.
3
Press
Menu/Set
.
4
Enter the One Touch and Speed Dial numbers (one after the other), Search numbers or a Group
number you have stored.
5
Press
Fax Start
. The machine stores the document in memory, and then transmits it to all the
numbers you entered. If the line is busy, your machine will redial.
Press
Stop/Exit
during transmission to cancel the current fax Broadcast.
To cancel all locations, press
Menu/Set
,
4
. (See
Cancelling a Scheduled Job
,
page 40.)
