Brother FAX-575 User Manual Download

Page: 70 / 114

7 - 1

Quick-Dial numbers and dialing options

Storing numbers for easy dialing

You can set up the fax machine to do following types of easy
dialing: One-Touch, Speed-Dial and Groups for Broadcasting
faxes. When you dial a quick-dial number, the LCD shows the
name, if you stored it, or the number.

Storing One-Touch Dial numbers

Your fax machine has One-Touch keys where you can store fax or
phone numbers for automatic dialing. (See

One-Touch dialing

page 7-5.) One-Touch keys are located on the right side of the
control panel.

Press

Menu/Set

Press the One-Touch key
where you want to store a number.

Enter the number (up to 20 digits).

Press

Menu/Set

Use the dial pad to enter the
name (up to 15 characters).

Press

Menu/Set

. You can use the chart to help you enter

letters. (See

Entering text

on page 4-2.)

—

Press

Menu/Set

, to store the number without a name.

Press

▲

▼

to select the type of number and press

Menu/Set

Return to Step 2 to store another One-Touch number.

—

Press

Stop/Exit

to exit.

Quick-Dial numbers and dialing
options

If you lose electrical power, the quick-dial numbers that are in
the memory will not be lost.

To enter a pause in the dialing sequence, press

Redial/Pause

. (See

Pause

on page 7-7.)

FAX

a fax only number

TEL

a telephone (voice) number

FAX/TEL

both a fax and telephone (voice) number

CHAIN

a number (usually an access code) for chain
dialing. Selecting CHAIN tells the fax
machine that the complete number has not
yet been entered.

1.ONE-TOUCH DIAL

NAME:

Summary of Contents for FAX-575



















































































































Search results

Summary of Contents for FAX-575

Reviews:

Related manuals for FAX-575

Brands by name

Popular brands

Brother FAX-575, User Manual

Search results

Summary of Contents for FAX-575

Reviews:

Related manuals for FAX-575

Brands by name

Popular brands