Brother FAX-2480C User Manual Download

Page: 102 / 143

Troubleshooting and Routine Maintenance

Document is jammed inside the ADF
unit

Take out any paper from the ADF that is
not jammed.

Lift the document cover.

Pull the jammed document out to the
left.

Close the document cover.

Press

Stop/Exit

Printer jam or paper jam

Take out the jammed paper depending on
where it is jammed in the machine. Open and
close the scanner cover to clean the error.

Pull the paper tray (1) out of the
machine.

Pull out the jammed paper (1).

If you cannot remove the jammed
paper from the front of the machine,
or the error message still appears on
the LCD after you have removed the
jammed paper, please go to the next
step.

Remove the Jam Clear Cover (1) from
the back of the machine. Pull the
jammed paper out of the machine.

Summary of Contents for FAX-2480C
















































































































































Search results

Summary of Contents for FAX-2480C

Reviews:

Related manuals for FAX-2480C

Brands by name

Popular brands

Brother FAX-2480C, User Manual

Search results

Summary of Contents for FAX-2480C

Reviews:

Related manuals for FAX-2480C

Brands by name

Popular brands