Brother FAX-1360, User Manual

Page: 33 / 124

Sending a fax
25
5
Sending a fax manually
5
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode .
b
Load your document.
c
Pick up the handset of the machine or
press
Hook/Hold and listen for a dial
tone.
d
Dial the fax number you want to call.
e
When you hear the fax tone, press Start .
f
If you picked up the handset, replace it.
Sending a fax at the end of a
conversation
5
At the end of a conversation you can send a
fax to the other party before you both hang up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Make sure you are in Fax mode .
c
Load your document.
d
Press Start .
e
If you picked up the handset, replace it.
Out of Memory message
5
If you get an
Out of Memory
message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an
Out of Memory
message
while scanning a subsequent page, you will
have the option to press
Start to send the
pages scanned so far, or to press Stop/Exit
to cancel the operation.
Note
• If you get an
Out of Memory
message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 23.)
• To clear
Out of Memory
message,
please see “ Turning off Remote Fax
Options ” on page 48, “ Printing a fax from
the memory '” on page 30, and “ Checking
and cancelling waiting jobs '” on page 24.