Brother FAX-1355 User Manual Download Page 54

Page: 54 / 127

Chapter 8

Search

You can search for names you have stored in
the One-Touch and Speed-Dial memories.

Press

Search/Speed Dial

and the menu

keys to search numerically, or use the dial
pad and then the menu keys to search
alphabetically.

1 To search numerically.

2 To search alphabetically, you can use the

dial pad to enter the first letter of the name
you are looking for.

Fax Redial

If you are sending a fax manually and the line
is busy, press

Redial/Pause

, and then press

Start

to try again. If you want to make a

second call to the last number dialled, you
can save time by pressing

Redial/Pause

and

Start

Redial/Pause

only works if you dialled from

the control panel.

If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.

Storing numbers

You can set up your machine to do the
following types of easy dialling: One-Touch,
Speed-Dial and Groups for broadcasting
faxes. When you dial a Quick-Dial number,
the LCD shows the name, if you stored it, or
the number.

Note

If you lose electrical power, the Quick-Dial
numbers that are in the memory will not be
lost.

Storing a pause

Press

Redial/Pause

to put a 3.5-second

pause between numbers. If you are dialling
overseas, you can press

Redial/Pause

many times as needed to increase the length
of the pause.

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands