Brother FAX-1355 User Manual Download Page 18

Page: 18 / 127

Chapter 2

Scanning area

The figures below show the areas you cannot
scan on paper.

Handling and using
plain paper

You can use plain paper only.
To get the best print quality, we suggest using
Brother paper. (See table below.)
If Brother paper is not available in your
country, we recommend testing various
papers before purchasing large quantities.

Avoid touching the printed surface of the
paper immediately after printing; the
surface may not be completely dry and
may stain your fingers.

• Store paper in its original packaging,

and keep it sealed. Keep the paper flat
and away from moisture, direct
sunlight and heat.

Improper Setup

DO NOT use the following kinds of paper:

• Damaged, curled, wrinkled, or

irregularly shaped paper

1 2 mm (0.08 in.) or longer

• Extremely shiny or highly textured paper
• Paper already printed on by a printer
• Paper that cannot be arranged uniformly

when stacked

• Paper made with a short grain

Paper capacity of the output paper tray

Up to 50 sheets of 20 lb Letter or 80 g/m

paper.

Usage Document

Size

Top (1)

Bottom (2)

Left (3)

Right (4)

Fax

Letter

3 mm
(0.12 in.)

4 mm
(0.16 in.)

3 mm
(0.12 in.)

Copy

Letter

3 mm
(0.12 in.)

4 mm
(0.16 in.)

3 mm
(0.12 in.)

Brother paper

Paper Type

Item

A4 Plain

BP60PA

Summary of Contents for FAX-1355
































































































































Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands

Brother FAX-1355, User Manual

Search results

Summary of Contents for FAX-1355

Reviews:

Related manuals for FAX-1355

Brands by name

Popular brands