Brother DSmobile DS-635, Online User'S Manual

Page: 81 / 164

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use
Infrastructure Mode > Configure Wi-Fi Settings in Infrastructure Mode
Configure Wi-Fi Settings in Infrastructure Mode
Related Models : DSmobile DS-940DW
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and write down the current wireless network settings.
Network Name (SSID)
Network Key (Password)
For example:
Network Name (SSID)
HELLO
Network Key (Password)
12345
If your router uses WEP encryption, enter the Network Key (Password) used as the first WEP key. Your
Brother machine supports the use of the first WEP key only.
2. Connect the scanner to your computer using Wireless Direct.
3. Start your web browser.
4. Type "https://192.168.118.1" in your browser's address bar.
If the machine prompts you for a password, type it, and then click . If you have not previously set your
own password, type the default login password. The default password for managing machine settings is
either:
•
the password located on the bottom of the machine and marked " Pwd ".
• initpass
5. Click the Network tab.
6. Click Wireless .
7. Click the Wireless (Setup Wizard) menu in the left navigation bar.
8. Click the Start Wizard button.
Wireless Setup Wizard starts automatically.
9. Follow the on-screen instructions to complete the wireless network setup.
You have completed the wireless network setup. To install drivers and software necessary for operating your
machine, go to your model's
Downloads page at support.brother.com .
To configure additional Network Settings, use the Web Based Management. See Related Information : Access
Web Based Management .
Related Information
• Use Infrastructure Mode
78