Home
/
Brother
/
DCP-T520W
/
Online User'S Manual

Brother DCP-T520W, Online User'S Manual, Page: 300 / 496

Share

Page: 300 / 496

Brother DCP-T520W Online User'S Manual Download Page 300

Lock the Machine Settings from the Control Panel

> About Using TX Lock

About Using TX Lock

Related Models

: MFC-T920DW/MFC-T925DW

Block unauthorised data transmission to and from the machine.
TX Lock lets you prevent unauthorised access to the machine.
While TX Lock is On, the following operations are available:
•

Receiving faxes

•

PC-Fax Receive (If PC-Fax Receive was already On)

While the TX Lock feature is turned on, your machine will receive faxes and store them in its memory. Then,
when TX Lock is turned off, the faxes will be sent to your chosen PC.

While TX Lock is On, the following operations are NOT available:
•

Operation from the control panel

•

PC printing

•

PC scanning

Related Information

•

Lock the Machine Settings from the Control Panel

•

Set the TX Lock Password

•

Change the TX Lock Password

•

Turn TX Lock On/Off

294

«
...
298
299
300
301
302
...
»

Summary of Contents for DCP-T520W

















































































































































































































































































































































































































































































































Reviews:

No comments