Brother DCP-T220 User Manual Download Page 62

Page: 62 / 237

Home >

Print from Your Computer (Windows)

> Use a Preset Print Profile (Windows)

Use a Preset Print Profile (Windows)

Print Profiles

are presets designed to give you quick access to frequently-used printing configurations.

1. Select the print command in your application.
2. Select

Brother XXX-XXXX Printer

(where XXX-XXXX is the name of your model), and then click the printing

properties or preferences button.
The printer driver window appears.

3. Click the

Print Profiles

tab.

4. Select your profile from the print profile list.

The profile settings are shown on the left side of the printer driver window.

5. Do one of the following:

•

If the settings are correct for your print job, click

•

To change the settings, go back to the

Basic

Advanced

tab, change settings, and then click

To display the

Print Profiles

tab at the front of the window the next time you print, select the

Always show

Print Profiles tab first.

check box.

Summary of Contents for DCP-T220













































































































































































































































Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands

Brother DCP-T220, User Manual

Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands