manualshive.com logo in svg

Brother DCP-T220, User Manual

Share
Download
Brother DCP-T220 User Manual Download Page 60

 Home > 

Print

 > 

Print from Your Computer (Windows)

 > Print a Colour Document in Greyscale (Windows)

Print a Colour Document in Greyscale (Windows)

Greyscale mode makes the print processing speed faster than colour mode. If your document contains colour,
selecting Greyscale mode prints your document in 256 levels of greyscale.

1. Select the print command in your application.
2. Select 

Brother XXX-XXXX Printer

 (where XXX-XXXX is the name of your model), and then click the printing

properties or preferences button.
The printer driver window appears.

3. Click the 

Basic

 tab.

4. For 

Colour / Greyscale

, select 

Greyscale

.

5. Change other printer settings, if needed.
6. Click 

OK

.

7. Complete your print operation.

  Related Information

•

Print from Your Computer (Windows)

 

56

Summary of Contents for DCP-T220














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands