Brother DCP-T220 User Manual Download Page 6

Page: 6 / 237

Home >

Before You Use Your Machine

> Definitions of Notes

Definitions of Notes

We use the following symbols and conventions throughout this User's Guide:

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injuries.

IMPORTANT

IMPORTANT indicates a potentially hazardous situation which, if not avoided, may
result in damage to property or loss of product functionality.

NOTE

NOTE specifies the operating environment, conditions for installation, or special
conditions of use.

Tips icons indicate helpful hints and supplementary information.

Electrical Hazard icons alert you to possible electrical shock.

Bold

Bold style identifies buttons on the machine's control panel or computer screen.

Italics

Italicised style emphasises an important point or refers you to a related topic.

Related Information

•

Before You Use Your Machine

Summary of Contents for DCP-T220













































































































































































































































Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands

Brother DCP-T220, User Manual

Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands