Brother DCP-T220 User Manual Download Page 29

Page: 29 / 237

Home >

Paper Handling

Load Paper

Load Paper in the Paper Tray

> Load Envelopes in the Paper

Tray

Load Envelopes in the Paper Tray

•

You can load envelopes in a variety of sizes. See

Related Information

Paper Type and Paper Size for

Each Operation

•

When you load envelopes in the tray, you must change the paper size setting on your computer.

•

Before loading envelopes in the tray, press the corners and sides of the envelopes to make them as flat as
possible.

1. If the paper support flap (1) is open, close it, and then close the paper support (2).

2. Pull the paper tray completely out of the machine.

3. Lift the output paper tray cover (1).

4. Load up to 10 envelopes in the paper tray with the printing surface

face down

. Loading more than 10

envelopes may cause paper jams.

Summary of Contents for DCP-T220













































































































































































































































Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands

Brother DCP-T220, User Manual

Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands