Brother DCP-T220 User Manual Download Page 27

Page: 27 / 237

Home >

Paper Handling

Load Paper

Load Paper in the Paper Tray

> Load Photo Paper in the Paper

Tray

Load Photo Paper in the Paper Tray

•

Load only one size and type of paper in the paper tray at a time.

•

When you load a different paper size in the tray, you must change the paper size setting on your computer.

1. If the paper support flap (1) is open, close it, and then close the paper support (2).

2. Pull the paper tray completely out of the machine.

3. Lift the output paper tray cover (1).

4. Gently press and slide the paper width guides (1) to fit the paper size, and then lift the stopper (2).

5. Close the output paper tray cover.

Summary of Contents for DCP-T220













































































































































































































































Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands

Brother DCP-T220, User Manual

Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands