manualshive.com logo in svg

Brother DCP-T220, User Manual

Share
Download
Brother DCP-T220 User Manual Download Page 223

 Home > 

Machine Settings

 > 

Change Machine Settings Using Web Based Management

 > 

General

Settings

 > Set Sleep Mode Countdown

Set Sleep Mode Countdown

The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep
Mode, it acts as if it is turned off. The machine will wake up and start printing when it receives a print job. Use
these instructions to set a time delay (countdown) before the machine enters Sleep Mode.

•

The timer will restart if any operation is carried out on the machine, such as receiving a print job.

•

The factory setting is five minutes.

1. Start Brother iPrint&Scan.

•

Windows

Launch 

(

Brother iPrint&Scan

).

•

Mac
In the 

Finder

 menu bar, click 

Go

 > 

Applications

, and then double-click the iPrint&Scan icon.

The Brother iPrint&Scan screen appears.

2. If your Brother machine is not selected, click the 

Select your Machine

 button, and then select your model

name from the list. Click 

OK

.

3. Click 

(

Machine Settings

) to configure the settings.

4. If required, type the password in the 

Login

 field, and then click 

Login

.

The default password to manage this machine’s settings is located on the back of the machine and marked
"

Pwd

".

5. Go to the navigation menu, and then click 

General

 > 

Sleep Time

.

Start from 

, if the navigation menu is not shown on the left side of the screen.

6. Enter the 

Sleep Time

 field (1-60).

7. Click 

Submit

.

  Related Information

•

General Settings

Related Topics:

•

Set the Machine to Power Off Automatically

•

Access Web Based Management

 

219

Summary of Contents for DCP-T220














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands