manualshive.com logo in svg

Brother DCP-T220, User Manual

Share
Download
Brother DCP-T220 User Manual Download Page 172

Difficulties

Suggestions

Look through the window of the ink tank to confirm the actual amount of
remaining ink.
If the remaining ink level is at or below the lower line under the minimum fill mark,
refill the ink tank.
See 

Related Information

: 

Refill the Ink Tanks

.

If old, unprinted data remains in the printer driver spooler, it will prevent new print
jobs from printing. Open the printer icon and delete all data as follows:
•

Windows 10, Windows Server 2016, and Windows Server 2019

Click 

 > 

Windows System

 > 

Control Panel

. In the 

Hardware and Sound

group, click 

View devices and printers

 > 

Printers

.

•

Windows 8.1
Move your mouse to the lower right corner of your desktop. When the menu
bar appears, click 

Settings

 > 

Control Panel

. In the 

Hardware and Sound

group, click 

View devices and printers

 > 

Printers

.

•

Windows Server 2012 R2
Click 

Control Panel

 on the 

Start

 screen. In the 

Hardware

 group, click 

View

devices and printers

 > 

Printers

.

•

Windows Server 2012
Move your mouse to the lower right corner of your desktop. When the menu
bar appears, click 

Settings

 > 

Control Panel

. In the 

Hardware

 group, click

View devices and printers

 > 

Printers

.

•

Windows 7 and Windows Server 2008 R2

Click 

/

Start

 > 

Devices and Printers

 > 

Printers and Faxes

.

•

Windows Server 2008

Click 

 

(Start)

 > 

Control Panel

 > 

Hardware and Sound

 > 

Printers

.

The headers or footers appear
when the document is displayed
on the screen but do not appear
when the document is printed.

There is an unprintable area on the top and bottom of the page. Adjust the top
and bottom margins in your document to allow for this.
See 

Related Information

: 

Unprintable Area

.

Cannot perform ‘Page Layout’
printing.

(Windows )
Check that the paper size setting in the application and in the printer driver are
the same.

Print speed is too slow.

(Windows)
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending, and printing time. Try the other quality settings in the printer
driver as follows:
In the printer driver, clear the 

Colour Enhancement

 check box on the 

Advanced

tab.

Turn the Borderless feature off. Borderless printing is slower than normal printing.
See 

Related Information

: 

Print Settings (Windows)

.

Turn the Quiet Mode setting off. Print speed is slower in Quiet Mode. See

Related Information

: 

Reduce Printing Noise

.

Make sure the Media Type setting in the printer driver or in the application you
use to print matches the type of paper you are using.
See 

Related Information

: 

Print Settings (Windows)

.

Print Quality Difficulties

Difficulties

Suggestions

Poor print quality

Check the print quality.
See 

Related Information

: 

Check the Print Quality

.

168

Summary of Contents for DCP-T220














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands