Brother DCP-T220 User Manual Download Page 118

Page: 118 / 237

Home >

Network

Wireless Network Settings

Use the Wireless Network

> Configure Your Machine for a

Wireless Network Using the One Push Method of Wi-Fi Protected Setup

™

(WPS)

Configure Your Machine for a Wireless Network Using the One Push
Method of Wi-Fi Protected Setup

™

(WPS)

Related Models

: DCP-T420W/DCP-T425W

If your wireless access point/router supports WPS (Push Button Configuration), you can use

WiFi Button/LED

on your machine's control panel to configure your wireless network settings.
1. Press

WiFi Button/LED

three times.

The

WiFi Button/LED

starts blinking.

2. Press the WPS button on your wireless access point/router.

If your wireless device is connected successfully, the

Power LED

and

WiFi Button/LED

are lit.

You have completed the wireless network setup. To install the drivers and software necessary to use your
machine, go to your model's

Downloads

page at

support.brother.com

(Windows) Or, use the Brother installation disc to set up your machine (not available in all countries).

Related Information

•

Use the Wireless Network

114

Summary of Contents for DCP-T220













































































































































































































































Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands

Brother DCP-T220, User Manual

Search results

Summary of Contents for DCP-T220

Reviews:

Brands by name

Popular brands