manualshive.com logo in svg

Brother DCP-T220, User Manual

Share
Download
Brother DCP-T220 User Manual Download Page 10

 Home > 

Introduction to Your Machine

 > Before Using Your Machine

Before Using Your Machine

Before attempting any printing operation, confirm the following:
•

Make sure you have installed the correct software and drivers for your machine.

•

For USB cable users: Make sure the interface cable is physically secure.

Selecting the correct type of paper

For high quality printing, it is important to select the correct type of paper. Be sure to read the information about
acceptable paper before buying paper, and to determine the printable area depending on the settings in the
printer driver or in the application you use to print.

Firewall (Windows) (DCP-T420W/DCP-T425W)

If your computer is protected by a firewall and you are unable to network print or network scan, you may need to
configure the firewall settings. If you are using the Windows Firewall and you installed the drivers using the steps
in the installer, the necessary firewall settings have been already set. If you are using any other personal firewall
software, see the User's Guide for your software or contact the software manufacturer.

  Related Information

•

Introduction to Your Machine

 

6

Summary of Contents for DCP-T220














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands