Brother DCP-L5500DN, User Manual

Page: 620 / 724

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set
Your Station ID
Set Your Station ID
Related Models : MFC-L5700DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/
MFC-L6800DW
Set the machine to print your Station ID and the fax's date and time at the top of each fax you send.
1. Press
[Settings]
>
[All Settings]
>
[Initial Setup]
>
[Station ID]
>
[Fax]
.
2. Enter your fax number (up to 20 digits) using the LCD, and then press
[OK]
.
3. Press
[Tel]
.
4. Enter your telephone number (up to 20 digits) using the LCD, and then press
[OK]
.
5. Press
[Name]
.
6. Enter your name (up to 20 characters) using the LCD, and then press
[OK]
.
• Press to cycle between letters, numbers and special characters. (The characters available
may differ depending on your country.)
• If you enter an incorrect character, press
d
or
c
to move the cursor to it and press . Press the
correct character.
• To enter a space, press
[Space]
or
c
.
• For more information, see Related Information .
7. Press .
NOTE
(USA only) The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a
computer or electronic device to send any message via a telephone fax machine unless such messages
clearly contain, in a margin at the top or bottom of each transmitted page, or on the first page of the
transmission, the date and time it is sent and an identification of the business or other entity or other
individual sending the message and the telephone number of the sending machine or such business,
other entity or individual. To program this information into your machine, see
Set the Date and Time and
Set Your Station ID .
Related Information
• General Settings
• How to Enter Text on Your Brother Machine
• Transfer Faxes to Another Fax Machine
• Transfer the Fax Journal Report to Another Fax Machine
613