Brother DCP-L5500DN User Manual Download Page 55

Page: 55 / 724

Home >

Paper Handling

Load Documents

> Load Documents on the Scanner Glass

Load Documents on the Scanner Glass

Use the scanner glass to fax, copy, or scan one page at a time.

Document Sizes Supported

Length:

•

(DCP-L5500DN/MFC-L5700DW)
Up to 11.8 in. (300 mm)

•

(DCP-L5600DN/DCP-L5650DN/MFC-L5800DW/MFC-L5850DW/
MFC-L5900DW/MFC-L6700DW/MFC-L6800DW)
Up to 14 in. (355.6 mm)

Width:

Up to 8.5 in. (215.9 mm)

Weight:

Up to 4.4 lb (2 kg)

To use the scanner glass, the ADF must be empty.

1. Lift the document cover.
2. Place the document on the scanner glass

face down

3. Place the corner of the page in the upper left corner of the scanner glass.

4. Close the document cover.

If the document is a book or is thick, gently press on the document cover.

Related Information

•

Load Documents

Summary of Contents for DCP-L5500DN




















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-L5500DN

Reviews:

Related manuals for DCP-L5500DN

Brands by name

Popular brands

Brother DCP-L5500DN, User Manual

Search results

Summary of Contents for DCP-L5500DN

Reviews:

Related manuals for DCP-L5500DN

Brands by name

Popular brands