Brother DCP-L5500DN User Manual Download Page 101

Page: 101 / 724

Scan Using the Scan Button on Your Brother Machine

> Scan Photos and Graphics

Scan Photos and Graphics

Send scanned photos or graphics directly to your computer.

Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software.

1. Load your document.

2. Press

[Scan]

3. Swipe left or right to display

[to Image]

4. Press

[to Image]

The icon moves to the middle of the Touchscreen and is highlighted in blue.

5. Press

[to Image]

6. If the machine is connected over the network, swipe up or down or press

to display the computer

where you want to send data, and then press the computer name.

If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD, and then press

[OK]

7. Do one of the following:

•

To change the scan settings, press

[Options]

, and then go to the next step.

•

To use the default scan settings, press

[Start]

The machine starts scanning. If you are using the machine's scanner glass, follow the Touchscreen
instructions to complete the scanning job.

To change scan settings, a computer with Brother's Control Center software installed must be connected to
the machine.

8. To scan both sides of the document (DCP-L5650DN/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/

MFC-L6800DW):
•

Press

[2-sided Scan]

, and then select the document type.

Summary of Contents for DCP-L5500DN




















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-L5500DN

Reviews:

Related manuals for DCP-L5500DN

Brands by name

Popular brands

Brother DCP-L5500DN, User Manual

Search results

Summary of Contents for DCP-L5500DN

Reviews:

Related manuals for DCP-L5500DN

Brands by name

Popular brands