Brother DCP-L5500D User Manual Download Page 23

Page: 23 / 705

Settings Screen Overview

Press

to view the current machine status on the LCD.

Use the Settings menu to access all of your Brother machine's settings.
The available features vary depending on your model.

1. Toner

•

Displays the remaining toner life.

•

Press to access the

[Toner]

menu.

2. Network (For wired network models)

•

Press to set up a network connection.

•

A four level indicator on the screen displays the current wireless signal strength if you are using a wireless
connection.

3. Date & Time

Displays the date and time set on the machine.
Press to access the

[Date & Time]

menu.

4. Screen Settings

Press to access the

[Screen Settings]

menu.

5. All Settings

Press to access a menu of all machine settings.

6. Tray Setting

Press to change the paper size and paper type settings.

7. Wi-Fi Direct (For wireless network models)

Press to set up a Wi-Fi Direct network connection.

Fax Preview (For MFC models without wireless network functionality)

•

Display the Fax Preview status.

•

Press to access the Fax Preview setting.

Beep Volume (For DCP models without wireless network functionality)

Press to access the volume setting.

Summary of Contents for DCP-L5500D

































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-L5500D

Reviews:

Brands by name

Popular brands

Brother DCP-L5500D, User Manual

Search results

Summary of Contents for DCP-L5500D

Reviews:

Brands by name

Popular brands