Brother DCP-L5500D User Manual Download Page 186

Page: 186 / 705

Home >

Scan

Scan from Your Computer (Windows

)

> Scan Using Windows

Photo Gallery or

Windows

Fax and Scan

Scan Using Windows

Photo Gallery or Windows

Fax and Scan

Windows

Photo Gallery or Windows

Fax and Scan applications are other options that you can use for

scanning.

•

These applications use the WIA scanner driver.

•

If you want to crop a portion of a page after pre-scanning the document, you must scan using the scanner
glass (also called the flatbed).

1. Load your document.
2. Launch your scanning application. Do one of the following:

•

(Windows

Photo Gallery)

Click

File

Import from Camera or Scanner

•

(Windows

Fax and Scan)

Click

File

New

Scan

3. Select the scanner you want to use.
4. Click

Import

The

New Scan

dialog box appears.

5. Adjust the settings in the Scanner Setup dialog box, if needed.

The scanner resolution can be set to a maximum of 1200 dpi. If you want to scan at higher resolutions, use
the

Scanner Utility

software of

Brother Utilities

If your machine supports 2-sided Scan and you want to scan both sides of your document, select

Feeder

(Scan both sides)

Source

6. Click

Scan

The machine starts scanning the document.

Related Information

•

Scan from Your Computer (Windows

)

•

WIA Driver Settings (Windows

)

179

Summary of Contents for DCP-L5500D

































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-L5500D

Reviews:

Brands by name

Popular brands

Brother DCP-L5500D, User Manual

Search results

Summary of Contents for DCP-L5500D

Reviews:

Brands by name

Popular brands