manualshive.com logo in svg

Brother DCP-L5500D, Service Manual

Share
Download
Brother DCP-L5500D Service Manual Download Page 402

App. 2-1

Confidential

APPENDIX 2 DELETING USER SETTING 

INFORMATION

The user setting information for the machine is stored in the main PCB. You can return this to 
the default settings by following the procedure below.

<Operating Procedure>

(1) Press the [Settings] 

 key while the machine is in the ready state.

(2) Press the [All Settings] key on the LCD.

(3) Press the [Initial Setup] key on the LCD.

(4) Press the [Reset] key on the LCD.

(5) Press the [Factory Reset] key on the LCD.

(6) "Factory Reset? It may take time until reset finishes. Yes No" appears on the LCD. Press 

the [Yes] key.

(7) "Machine will reboot after resetting. Press [OK] for 2 seconds to confirm." appears on the 

LCD. Press and hold the [OK] key for 2 seconds or longer to delete the user setting 
information and return the machine to the ready state.

Summary of Contents for DCP-L5500D

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands