manualshive.com logo in svg

Brother DCP-L3510CDW, Service Manual

Share
Download
Brother DCP-L3510CDW Service Manual Download Page 406

5-78

Confidential

1.3.33 Display machine error code (Function code 82)

< Function >

This function is used to display the latest error code on the LCD.

< Operating Procedure >

(1) For models with touch panel 

Press the [8], and then the [2] in the initial state of maintenance mode. 
“MACHINE ERR XXXX” is displayed on the LCD.

For models without touch panel

Press the [

▲

] or [

▼

] in the initial state of maintenance mode to display 

“MAINTENANCE 82” on the LCD, and press the [OK]. 
“MACHINE ERR XXXX” is displayed on the LCD.

(2) Press the [X] or [Stop], and the machine returns to the initial state of maintenance mode.

Summary of Contents for DCP-L3510CDW















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands