manualshive.com logo in svg

Brother DCP-L2531DW, Online User'S Manual, Page: 505 / 658

Share
Download
Brother DCP-L2531DW Online User'S Manual Download Page 505

 Home > 

Troubleshooting

 > 

Network Problems

 > Error Messages for Network Problems

Error Messages for Network Problems

Your Brother machine will display an error message if an error occurs. The most common error messages are
shown in the chart.

DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/
MFC-L2715DW/MFC-L2716DW

Error Messages Cause

Action

Cannot
Connect
A device is
already
connected.

Two mobile devices are already
connected to the Wi-Fi Direct
network when the Brother
machine is the Group Owner
(G/O).

After the current connection between your Brother machine and
another mobile device has shut down, try to configure the Wi-Fi
Direct settings again. You can confirm the connection status by
printing the Network Configuration Report.

Connection
Error

Other devices are trying to
connect to the Wi-Fi Direct
network at the same time.

Make sure there are no other devices trying to connect to the Wi-
Fi Direct network, and then try to configure the Wi-Fi Direct
settings again.

Connection
Fail

The Brother machine and your
mobile device cannot
communicate during the Wi-Fi
Direct network configuration.

•

Move the mobile device closer to your Brother machine.

•

Move your Brother machine and the mobile device to an
obstruction-free area.

•

If you are using the PIN Method of WPS, make sure you have
entered the correct PIN.

No Device

When configuring the Wi-Fi
Direct network, the Brother
machine cannot find your
mobile device.

•

Make sure your machine and mobile device are in the Wi-Fi
Direct mode.

•

Move the mobile device closer to your Brother machine.

•

Move your Brother machine and the mobile device to an
obstruction-free area.

•

If you are manually configuring the Wi-Fi Direct network,
make sure you have entered the correct password.

•

If your mobile device has a configuration page for how to
obtain an IP address, make sure the IP address of your
mobile device has been configured via DHCP.

HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/
MFC-L2771DW

Error Messages

Cause

Action

A device is
already
connected. Press
[OK].

Two mobile devices are
already connected to the Wi-Fi
Direct network when the
Brother machine is the Group
Owner (G/O).

After the current connection between your Brother machine
and another mobile device has shut down, try to configure
the Wi-Fi Direct settings again. You can confirm the
connection status by printing the Network Configuration
Report.

Connection Error

Other devices are trying to
connect to the Wi-Fi Direct
network at the same time.

Make sure there are no other devices trying to connect to
the Wi-Fi Direct network, and then try to configure the Wi-Fi
Direct settings again.

Connection Failed

The Brother machine and your
mobile device cannot
communicate during the Wi-Fi
Direct network configuration.

•

Move the mobile device closer to your Brother machine.

•

Move your Brother machine and the mobile device to an
obstruction-free area.

•

If you are using the PIN Method of WPS, make sure you
have entered the correct PIN.

498

Summary of Contents for DCP-L2531DW



















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments